Label Sheet Layout Guide: Dimensions, Margins & Alignment Rules

Setting up print templates for multi-label sheets requires precise measurements for top margins, side margins, label dimensions, and horizontal/vertical gutter gaps. Miscalculating margins by even 0.05 inches causes text to progressively creep off the label boundaries toward the bottom of the page.

Last updated: By MyHandyToolLab

Standard Label Sheet Specification Chart

Label PresetSheet FormatGrid (Across × Down)Label SizeTop MarginLeft MarginHoriz Gap
Avery 5160 / 8160 (30 Address Labels)LETTER3 × 10 (30 total)2.625" × 1"0.5"0.1875"0.125"
Avery 5163 / 8163 (10 Shipping Labels)LETTER2 × 5 (10 total)4" × 2"0.5"0.156"0.188"
Avery 5164 (6 Large Parcel Labels)LETTER2 × 3 (6 total)4" × 3.33"0.5"0.156"0.188"
Avery A4 L7160 (21 Address Labels)A43 × 7 (21 total)2.5" × 1.5"0.59"0.28"0.1"

The #1 Reason Labels Misalign: Printer Scaling

When printing PDF or Word label templates, most PDF readers automatically enable "Fit to Page", "Shrink Oversized Pages", or "Fit to Printable Area".

Because desktop printers typically have an unprintable bottom margin of 0.25", the software scales your entire document down to 94% or 96% size. The top row of labels prints fine, but by row 5, the text is printing across the label gap, and by row 10, the text is completely cut in half.

Always Print at 100% Actual Size

In your Adobe Acrobat or browser print dialog, always select Actual Size or set Custom Scale to exactly 100%.

Ready to try it?

Open the Open Label Sheet Calculator and follow the steps above.

Open tool

Related tools and guides

Frequently asked questions

How do I test label alignment without wasting expensive label sheets?

Print your layout onto a regular sheet of cheap white copy paper. Place the printed copy paper on top of a blank label sheet and hold both up to a bright window or desk lamp. You will immediately see if your text is centered inside the die-cut boundaries.