Plastic Spiral Coil Binding Size Guide: Diameters & Pitch Standards
Plastic spiral coil binding is the most durable, flexible document binding method available. Unlike metal Wire-O or plastic comb binding, a plastic coil bounces back when crushed, allows pages to rotate a full 360 degrees back-to-back, and will never bend out of shape in transit. Sizing requires taking the document thickness in millimeters and adding 3.5 mm to 4.0 mm rotation clearance.
Last updated: By MyHandyToolLab
Plastic Spiral Coil Sizing Matrix (4:1 Pitch Standard)
| Coil Size (mm) | Equivalent (Inches) | Max Book Stack (mm) | Capacity (20# Sheets) | Recommended Punch Margin |
|---|---|---|---|---|
| 6 mm | 0.236" | 3.5 mm | ~30 sheets | 3.5 mm |
| 8 mm | 0.315" | 5 mm | ~45 sheets | 3.5 mm |
| 10 mm | 0.394" | 7 mm | ~65 sheets | 3.5 mm |
| 12 mm | 0.472" | 9 mm | ~90 sheets | 4.2 mm |
| 14 mm | 0.551" | 11 mm | ~115 sheets | 4.2 mm |
| 16 mm | 0.630" | 13 mm | ~140 sheets | 4.2 mm |
| 18 mm | 0.709" | 15 mm | ~160 sheets | 4.2 mm |
| 20 mm | 0.787" | 17 mm | ~180 sheets | 5.0 mm |
| 22 mm | 0.866" | 19 mm | ~200 sheets | 5.0 mm |
| 25 mm | 0.984" | 22 mm | ~230 sheets | 5.0 mm |
Coil vs. Wire-O vs. Plastic Comb: Which is Best?
| Feature | Plastic Spiral Coil | Wire-O Double Loop | Plastic Comb |
|---|---|---|---|
| Durability | Indestructible / Bounces back | Can bend if crushed in a backpack | Brittle teeth break over time |
| 360° Page Turn | Yes (folds flat back-to-back) | Yes (folds flat back-to-back) | No (stays partially open) |
| Editing Pages | Difficult (must spin out coil) | Cannot be re-opened (discard wire) | Easy (comb opener allows edits) |
| Visual Style | Modern, colorful, informal | Executive, formal, luxury | Budget, educational, retro |
Ready to try it?
Open the Open Coil Binding Size Calculator and follow the steps above.
Related tools and guides
Frequently asked questions
How do you cut and crimp plastic coil binding?
Always use specialized coil crimping pliers with the red dot facing upward toward your ceiling. Squeeze the pliers to snip off excess coil and crimp a 90-degree inward bend in one motion to keep the coil from unthreading.