Printing & PublishingProcessed in your browser

Coil Binding Size Calculator

Determine spiral plastic coil diameter and 4:1 pitch punch margins

How to use Coil Binding Size Calculator

  1. Step 1: Enter sheet count - Coil Binding Size Calculator
    Step 1

    Enter sheet count

    Enter total sheets including cardstock or poly covers.

  2. Step 2: Select paper weight - Coil Binding Size Calculator
    Step 2

    Select paper weight

    Choose standard 20# copy paper or heavier presentation stocks.

  3. Step 3: Read coil diameter - Coil Binding Size Calculator
    Step 3

    Read coil diameter

    Order or insert the recommended millimeter coil size.

About this tool

The Coil Binding Size Calculator calculates the recommended plastic spiral coil diameter and punch machine settings for booklets, training manuals, and notebooks. Plastic spiral coil is prized for its extreme durability and ability to lay completely flat with 360-degree wrap-around reading.

Selecting the right coil diameter requires calculating the total book block thickness plus a mandatory 3.5 mm to 4.0 mm clearance. A coil that is too tight causes pages to buckle and resist turning, while an overly large coil wastes space.

The tool outputs recommended coil diameter in millimeters (from 6 mm up to 50 mm), standard 4:1 pitch hole counts, and depth margin settings for standard letter and A4 formats.

Read the full guide

Plastic Spiral Coil Binding Diameter Guide

Key Features

  • Plastic coil diameters from 6 mm (30 pages) to 50 mm (480 pages)
  • Standard 4:1 pitch (4 holes/inch) hole counts
  • Adjustable punch margin depth recommendations in mm
  • Includes rotation clearance allowance in the math
  • Letter and A4 binding edge length options

Limitations

  • •Plastic coil uses millimeter sizing. For wire binding, use the Wire-O Binding Size Calculator.

Tips & common mistakes

  • •Always crimp both coil ends with special crimping pliers (red dot facing up) to prevent the plastic coil from spinning off.
  • •For thicker documents (over 20 mm coil), choose an oval-hole punch over a round-hole punch for easier page threading.
  • •Allow 1 to 2 inches of coil overhang on each side before cutting and crimping.

Last updated:

Coil Binding Size Calculator FAQ

Measure your document stack thickness in millimeters and add 3.5 mm to 4.0 mm for rotation clearance. For a 10 mm stack, choose a 14 mm coil.
4:1 pitch means 4 holes per inch along the binding edge, which produces 43 to 44 holes along a standard 11-inch letter page.

Related tools

More tools from the same category and nearby utilities.