Paper Weight vs. Thickness: Caliper, GSM, and Stack Height Guide

Paper weight and paper thickness are two completely different physical measurements that print buyers and designers frequently confuse. A sheet of 80# Text paper is much thinner than a sheet of 80# Cover paper, while a 20# Bond copy paper shares almost the exact same caliper as a 50# Offset sheet. Understanding paper caliper (measured in mils, points, and microns) and metric GSM enables accurate spine sizing, mailing weight estimates, and print quality control.

Last updated: By MyHandyToolLab

The Difference Between Paper Weight and Caliper

In the United States and North America, traditional paper weight is measured as basis weight in pounds (# or lb). Basis weight is defined as the weight of 500 uncut master parent sheets in a grade's standard parent size.

Because different categories of paper have different standard parent sheet sizes, identical pound numbers DO NOT represent equal thickness:

  • Bond / Writing Paper: Standard parent sheet size is 17" × 22". Used for stationery, everyday office copy paper, and invoices.
  • Book / Text / Offset Paper: Standard parent sheet size is 25" × 38" (more than double the surface area of a bond parent sheet). Used for trade books, flyers, and brochures.
  • Cover Paper (Cardstock): Standard parent sheet size is 20" × 26". Used for postcards, booklet covers, business presentation folders, and packaging.
  • Point Caliper (pt): Used for heavy cardstocks, packaging boards, and commercial business cards (where 1 pt = 1/1000th of an inch).

Why GSM Solves Confusion Worldwide

In Europe, Asia, and international ISO printing, paper is classified by GSM (grams per square meter). GSM measures mass over a fixed unit of area regardless of parent sheet size. For example, standard office copy paper is universally 75 to 80 GSM, lightweight brochures are 120 GSM, and sturdy postcards are 250 to 300 GSM.

Standard Paper Weight & Caliper Conversion Table

The table below shows industry-standard conversions across paper categories based on TAPPI T410 / T411 testing standards:

Grade & Common NameMetric GSMSingle Caliper (Inches)Caliper (Mils / pt)Microns (µm)Pages Per Inch (PPI)
20# Bond / 50# Offset (Standard Copy)75 GSM0.0039"3.9 mil99 µm512 PPI
24# Bond / 60# Text (Letterhead)90 GSM0.0045"4.5 mil114 µm444 PPI
28# Bond / 70# Text (Brochure / Book)105 GSM0.0052"5.2 mil132 µm384 PPI
32# Bond / 80# Text (Magazine Text)120 GSM0.0058"5.8 mil147 µm344 PPI
65# Cover (Lightweight Cardstock)176 GSM0.0085"8.5 mil216 µm236 PPI
80# Cover (Standard Postcard)216 GSM0.0105"10.5 mil267 µm190 PPI
100# Cover (Heavy Postcard)270 GSM0.0130"13.0 mil330 µm154 PPI
12 pt Cardstock (Packaging / Tags)250 GSM0.0120"12.0 mil305 µm166 PPI
14 pt Cardstock (Standard Business Card)310 GSM0.0140"14.0 mil356 µm142 PPI
16 pt Cardstock (Luxury Business Card)360 GSM0.0160"16.0 mil406 µm125 PPI

How to Calculate Stack Height and Ream Thickness

When ordering paper boxes, shipping cartons, or binding equipment (such as coil binding coils or staple leg lengths), you must know total stack height:

The Stack Height Formula

1. Single Sheet Caliper = Caliper in Inches (e.g. 0.0039" for 20# copy paper)
2. Stack Height = Sheet Count × Single Sheet Caliper
3. Stack Height in Millimeters = Stack Height in Inches × 25.4
4. Reams Count = Sheet Count ÷ 500

For example, 500 sheets of 20# copy paper: 500 × 0.0039" = 1.95 inches (49.5 mm). A carton of 10 reams (5,000 sheets) will stack approximately 19.5 inches tall without carton compression.

Coated vs. Uncoated Paper Caliper Differences

Two paper stocks with the identical GSM or basis weight will frequently have different thicknesses depending on whether they are coated or uncoated:

  • Uncoated Woodfree Paper: Fibers remain porous and loosely pressed. This creates high bulk and higher caliper thickness per unit weight.
  • Gloss Coated Paper: Coated with clay and minerals, then passed between polished steel calender rollers under intense pressure. This compresses fibers, making gloss stocks noticeably thinner and denser than uncoated stocks of the same GSM.
  • Matte / Silk Coated: Moderately calendered with low-glare mineral coatings. Slightly bulkier than gloss paper but thinner than uncoated paper.

Ready to try it?

Open the Paper Thickness Calculator and follow the steps above.

Open tool

Related tools and guides

Frequently asked questions

What is a mil in paper thickness?

A mil is one-thousandth of an inch (0.001"). A piece of standard copy paper measuring 0.0039" thick is 3.9 mils thick.

Is 1 point (pt) the same as 1 mil?

In the commercial printing paper industry, yes: 1 pt of paper caliper equals exactly 0.001 inch (1 mil). A 14 pt cardstock sheet is 0.014 inches thick. Note that this is different from typographic font points (which equal 1/72 of an inch).

How much does a 500-sheet ream of 20# paper weigh?

A standard 500-sheet ream of 20# Bond US Letter paper (8.5" × 11") weighs approximately 5.0 pounds (2.27 kg). An entire 10-ream carton (5,000 sheets) weighs approximately 50 pounds.