How to use Paper Thickness Calculator
- Step 1
Choose paper grade or enter custom weight
Pick a standard preset or enter basis weight (lbs) or GSM.
- Step 2
Enter sheet count
Specify how many sheets are in your stack or job run (e.g. 500 for a standard ream).
- Step 3
View thickness & ream specs
Read exact caliper, stack height in inches/mm, and equivalent basis weights.
About this tool
The Paper Thickness Calculator accurately determines the physical thickness (caliper) and stack height of any paper grade from its basis weight or metric GSM.
Paper weight numbers are notoriously confusing because American basis weights depend on different master parent sheet dimensions (17"×22" for bond, 25"×38" for text/book, and 20"×26" for cover cardstock). A 20# Bond and a 50# Text share nearly identical thickness (~0.0039" / 3.9 mil / 75 GSM), whereas an 80# Cover is vastly thicker than an 80# Text.
This utility converts between all major grading systems, outputs caliper in mils (thousandths of an inch), microns (µm), and points (pt), calculates pages per inch (PPI), and models physical stack height and ream weight. All conversions follow TAPPI T410/T411 standards directly in your browser.
Read the full guide
Paper Weight vs. Thickness Caliper Guide
Key Features
- Standard presets for 20# copy paper, 24# premium, 80# text, 100# cover, 14pt cardstock
- Instant conversion to mils, microns (µm), points (pt), and pages per inch (PPI)
- Calculates total stack thickness and weight for any sheet count or ream quantity
- Equivalent weights cross-comparison table across Bond, Text, Cover, and GSM
- 100% client-side privacy with no uploads
Limitations
- •Caliper can vary ±5% between mill production runs and relative humidity levels.
- •Recycled fiber stocks tend to have higher bulk (caliper) than virgin fiber at identical GSM.
Tips & common mistakes
- •Coated stocks (gloss/silk) are denser and thinner than uncoated stocks of the exact same basis weight.
- •For book spine planning, use manufacturer-supplied PPI or multiply page count by single sheet caliper.
- •1 point (pt) in paper caliper is equal to 1 mil (0.001 inch), not typography points (1/72 inch).
Last updated: