How to Make a Passport Photo Online: Pakistan, India, and Visa Formats

The Passport Photo Maker lets you crop and size any portrait photo to the exact dimensions required for Pakistani, Indian, and international travel documents — all at true 300 DPI print quality, in your browser. This guide covers every preset, the pixel math behind each format, common framing mistakes, and what to do before submitting.

Last updated: By MyHandyToolLab
Note: For the DGIP online passport portal, DGIP states that photos must be professionally taken and must not be edited in software. This tool prepares correct size and background for printing and other uses. Always verify DGIP requirements at onlinemrp.dgip.gov.pk before submitting.

Supported photo formats and dimensions

The tool ships with three presets covering the most common identification photo requirements. Each exports at 300 DPI — the minimum resolution for sharp, print-ready results.

PresetPhysical sizePixels at 300 DPICommon use
Pakistan 35×45 mm35 mm wide × 45 mm tall413 × 531 pxPakistan passport, ID cards
India 2×2 inch51 mm × 51 mm600 × 600 pxIndia passport, visa applications
International 35×45 mm35 mm × 45 mm413 × 531 pxSchengen visa, UK visa, most international

The pixel calculation explained

Pixels and millimetres are connected by the print resolution (DPI — dots per inch). At 300 DPI, one inch contains 300 pixels. One inch equals 25.4 mm.

DimensionFormulaResult
Pakistan width (35 mm)(35 ÷ 25.4) × 300413 pixels
Pakistan height (45 mm)(45 ÷ 25.4) × 300531 pixels
India width (51 mm)(51 ÷ 25.4) × 300600 pixels
India height (51 mm)(51 ÷ 25.4) × 300600 pixels
When you download from the tool, the JPEG carries embedded 300 DPI metadata. A photo kiosk or home printer that reads DPI metadata will automatically print the image at the correct physical size without resizing.

Step-by-step: how to use the tool

  1. 1.
    Choose your format preset Click 'Pakistan 35×45 mm', 'India 2×2 inch', or 'India / Visa 35×45 mm'. The canvas resizes to the correct aspect ratio immediately.
  2. 2.
    Upload your portrait Select a well-lit photo with your face clearly visible. The photo should be a close-up showing your head and shoulders. Avoid group photos or cropped screenshots — these reduce pixel quality.
  3. 3.
    Centre your face using the guide oval Drag the image so your eyes align with the upper portion of the oval. Zoom until your chin and crown are both inside the oval with a small margin at the top. For Pakistani passports, the DGIP diagram requires face height (chin to crown) between 29 mm and 34 mm.
  4. 4.
    Select a background Choose plain white for most official documents. Light blue is accepted by some portals and ID systems. Transparent is available for graphic design use, though it is not suitable for printed passport photos.
  5. 5.
    Download and review Click 'Download passport photo JPG'. Open the file and confirm that your face is centred, the background is plain and unbroken, and no shadows are visible across your face or shoulders.

Pakistan DGIP passport photo requirements summary

The following is a summary based on DGIP requirements (source: onlinemrp.dgip.gov.pk). Always verify at the official site before submitting, as requirements can change. Last verified: November 2026 ().

RequirementSpecification
Physical dimensions45 mm high × 35 mm wide
Photo recencyTaken within the last 6 months
BackgroundPlain white, no shadows or patterns
Online upload file sizeMust not exceed 5 MB (DGIP portal)
Face height (chin to crown)Between 29 mm and 34 mm per DGIP diagram
ExpressionNeutral, mouth closed, eyes open
GlassesEyes must be fully visible, no glare or reflection
Head coveringNot permitted (except for religious reasons — verify with DGIP)
Photo sourceProfessionally taken; not cropped from a larger picture
DGIP explicitly states that photos must be professionally taken and must not be edited in software like Photoshop. For the DGIP online application portal, check their requirements before using a digitally prepared photo.

Tips for taking a photo that meets requirements

  • Stand about 1–1.5 metres from a plain white wall to avoid shadows on the background.
  • Face a window with natural daylight — this gives even, shadow-free illumination.
  • Keep your head upright, eyes level with the camera, and your expression neutral.
  • Wear your everyday clothes. Avoid white or very pale tops that blend into the background.
  • Take the photo in landscape orientation first, then crop — do not use the camera's portrait crop feature, which reduces resolution.
  • Use the highest resolution setting on your phone. Avoid screenshots of existing photos.
  • If using the Background Remover tool first, ensure the cutout is clean before importing into the Photo Maker.

Common mistakes that cause rejection

MistakeWhy it causes rejectionHow to fix
Head cut off at topFull head must be visible including hairZoom out until there is a small gap between crown and frame top
Dark shadows on faceUniform lighting requiredFace a window or use two lamps on either side
Glasses with glareEyes must be fully visibleRemove glasses or tilt slightly to eliminate lens reflection
Head covering (hat, cap)Face from forehead to chin must be fully visibleRemove headwear before taking the photo
Non-white backgroundPlain white is required for most formatsUse the tool's background fill option or Background Remover
Smiling or open mouthNeutral expression requiredRelax facial muscles, keep lips gently closed
Photo cropped from a group shotDGIP explicitly disallows thisRetake the photo individually against a plain background

Troubleshooting

IssueCauseFix
Downloaded photo is blurry when printedSource photo had low resolutionUse a photo taken at full resolution; avoid screenshots
Face looks too small in the frameZoom level too lowPinch-zoom in or use the slider until face fills roughly 70–80% of frame height
Background fill has a visible borderStrong shadow at subject edgeRe-take photo against a plain wall with better lighting or use Background Remover first
File size exceeds 5 MB portal limitVery high-resolution source photoUse Reduce Image to 50KB to bring the exported JPG within limits
Tool does not open on old phoneBrowser lacks canvas API supportUpdate your browser or use Chrome / Safari on a newer device

Ready to try it?

Open the Passport Photo Maker and follow the steps above.

Open tool

Related tools and guides

Frequently asked questions

What is the official Pakistan passport photo size?

According to DGIP requirements, a Pakistani passport photo must be 45 mm high by 35 mm wide with a plain white background, taken within the last 6 months. The face height (chin to crown) must be between 29 mm and 34 mm per the DGIP diagram. Source: onlinemrp.dgip.gov.pk ( — verify at the official page before submitting).

Can I use this tool for the DGIP online passport application?

This tool prepares the correct size and background for printing and other uses. DGIP states that photos submitted through their online portal must be professionally taken and must not be edited in software. Check the DGIP portal requirements page before using a digitally prepared photo for an online application.

What is the maximum file size for the DGIP online portal?

The digital photograph file size must not exceed 5 MB on the DGIP portal (onlinemrp.dgip.gov.pk). If your exported JPG is larger, use the Reduce Image to 50KB tool to compress it.

Is my photo uploaded to any server?

No. All cropping, zooming, and canvas exports happen locally on your device in your web browser. Your photographs are never transmitted to any server.

Can I make an India passport photo with this tool?

Yes. Select the "India 2×2 inch" preset, which produces a 600×600 pixel photo at 300 DPI — the standard size for Indian passport and visa applications. Verify current requirements at passportindia.gov.in before submitting.

How do I remove a busy background before making a passport photo?

Use the Background Remover tool first. It uses an on-device AI model to cut out the subject and apply a solid white or light-blue fill. Then bring that image into the Passport Photo Maker to crop and size it correctly.