Home & GardenProcessed in your browser

Gravel Calculator

Calculate tons, cubic yards & 50lb bags for driveways, paths & French drains

How to use Gravel Calculator

  1. Step 1: Select project shape - Gravel Calculator
    Step 1

    Select project shape

    Choose rectangular patio/driveway or circular fire pit area.

  2. Step 2: Enter dimensions and depth - Gravel Calculator
    Step 2

    Enter dimensions and depth

    Input length and width (or diameter) and layer depth in inches.

  3. Step 3: Choose aggregate type - Gravel Calculator
    Step 3

    Choose aggregate type

    Select #57 stone, pea gravel, crusher run, or river rock density profile.

  4. Step 4: Review weight and bags - Gravel Calculator
    Step 4

    Review weight and bags

    Read volume in cubic yards, weight in tons, and equivalent 50-lb bags.

About this tool

The Gravel Calculator accurately computes the volume in cubic yards and weight in US short tons for landscape gravel, driveway base, and decorative stone installations.

Because gravel settles and compacts after spreading, ordering strictly by raw volume frequently results in shallow coverage. Furthermore, quarries sell gravel by weight (short tons = 2,000 lbs), while retail garden centers sell by 0.5 cu ft bags (~50 lbs each). This tool includes tested density profiles for pea gravel (2,700 lbs/yd³), #57 crushed stone (2,800 lbs/yd³), crusher run base (2,900 lbs/yd³), and washed river pebble (2,600 lbs/yd³) to give you exact purchasing figures.

Read the full guide

How to Calculate Tons and Cubic Yards of Gravel

Key Features

  • Rectangular and circular area modes with inch-precision depth inputs
  • Sourced density table for Pea Gravel, #57 Stone, Crusher Run, and River Pebble
  • Instant conversion across Cubic Feet, Cubic Yards, Tons, and Pounds
  • Retail 50-lb (0.5 cu ft) bag calculator with compaction allowance
  • Cost estimator comparing bulk delivery vs. bagged retail

Tips & common mistakes

  • •One cubic yard of gravel weighs between 1.30 and 1.45 US short tons.
  • •Install woven geotextile fabric underneath gravel to prevent stone sinkage.
  • •For projects over 1.5 cubic yards, bulk quarry delivery is cheaper than 50-lb retail bags.

Last updated:

Gravel Calculator FAQ

On average, one cubic yard of gravel weighs approximately 1.35 to 1.45 tons (2,700 to 2,900 lbs), depending on moisture, stone size, and compaction fines.
Driveways typically require a 4-to-6-inch base of compacted crusher run (#411 or road base), topped with a 2-to-3-inch surface layer of #57 crushed stone or pea gravel.
A standard 50-lb bag of gravel contains 0.5 cubic feet. Since there are 27 cubic feet in a cubic yard, you need 54 bags of 50-lb gravel to make one cubic yard.
One ton of gravel covers approximately 100 square feet at 2 inches deep, or roughly 65 to 70 square feet at 3 inches deep.

Related tools

More tools from the same category and nearby utilities.