Home & GardenProcessed in your browser

Greenhouse Plastic Calculator

Calculate polyethylene film roll dimensions, end walls & wiggle wire for hoop houses

How to use Greenhouse Plastic Calculator

  1. Step 1: Select frame geometry - Greenhouse Plastic Calculator
    Step 1

    Select frame geometry

    Choose Quonset (round arch) or Gothic (pointed ridge) hoop profile.

  2. Step 2: Enter frame dimensions - Greenhouse Plastic Calculator
    Step 2

    Enter frame dimensions

    Input greenhouse frame length, width, and center peak height in feet.

  3. Step 3: Toggle double-layer poly - Greenhouse Plastic Calculator
    Step 3

    Toggle double-layer poly

    Check the double-layer option if running an air inflation blower system.

  4. Step 4: Order standard roll size - Greenhouse Plastic Calculator
    Step 4

    Order standard roll size

    View required film roll dimensions, end-wall sheets, and wiggle wire channels.

About this tool

The Greenhouse Plastic Calculator determines the exact roll dimensions of UV-treated polyethylene film required to skin commercial high tunnels, hoop houses, and DIY caterpillar tunnels.

Ordering greenhouse film requires measuring the arc length over the hoops (bow length) rather than the building height, plus adding sufficient allowance for trench burial or hip-board lock channels (typically 2 feet on each side). This tool supports round Quonset arches and peaked Gothic profiles, calculates the main roof/sidewall film, dimensions for both gable end walls, and total wiggle wire lock channel footage.

Read the full guide

Hoop House Poly Film Sizing & Wiggle Wire Guide

Key Features

  • Geometric arc calculations for Quonset (round) and Gothic (peaked) frames
  • Trench burial and hip-board attachment allowance (+2 ft per side)
  • Single-layer and double-layer inflation poly area sizing
  • End-wall film dimensions for front and rear gable walls
  • Wiggle wire lock channel linear footage estimation

Tips & common mistakes

  • •Measure the ground-to-ground arc distance over the peak rather than the building height.
  • •Add at least 2 feet of margin on each side (4 feet total) for trenching or baseboard channels.
  • •Use only 4-year UV-stabilized greenhouse poly film, never standard construction sheeting.

Last updated:

Greenhouse Plastic Calculator FAQ

Film length equals frame length plus 4 feet (2 feet on each end for securing). Film width equals the arc/bow length up and over the peak plus 4 feet (2 feet on each side for trenching or baseboard fastening).
6-mil (0.006") UV-stabilized greenhouse polyethylene film is the commercial standard. It is rated to withstand sunlight degradation for 4 years, unlike cheap construction plastic which degrades in 3-4 months.
Wiggle wire (spring wire) and aluminum lock channels secure plastic film tightly to greenhouse bows and baseboards. You need enough channel to run along both ground baseboards plus the outer perimeter of both end bows.
Two sheets of 6-mil poly separated by air from a small inflation blower provide an R-value of ~1.5 to 2.0, reducing winter heating costs by 30% to 40% and dampening wind whip on the structure.

Related tools

More tools from the same category and nearby utilities.